- This tank design is installed in multiple units
- Each unit is tongue and groove design and is sealed with a fibrous mastic sealant
- Tanks conform to National Standard of Canada CAN/CSA B66-16
Notes
1. 75mm dia. PVC pipe cast-in to facilitate pump installation
or venting
2. 25mm Float Tree complete with bracket mounted to riser,
float bracket and pump pad
3. Cast in place 610mm ID Tuf-tite riser with dome lid secured
with stainless steel fasteners
4. Water storage capacity to underside of top
Holding Tanks Features
Concrete Strength
Minimum standard for our Industry is 28 MPa over 28 Days, our strength reports are almost double the minimum.
The pipes that go into the tank have to be watertight. We cast our tanks with flexible connections that are easy to seal and allow 15 degrees of deflection.